Price:
$11.91

Free Shipping

Description

1. Cable length: 66CM (heating sheet to switch), 55CM (switch to electric door lock)
2. Product material: composite fiber heating wire + black non-woven fabric, (L bracket) stainless steel
3. Input voltage: DC12V
4. Power: high-end 16W, mid-range 12W, low-grade 8W
5. Installation method: 3M glue fixed, L bracket lens holder fixed
6. Waterproof and flame retardant, more uniform and stable heating, more comfortable feel
7. Built-in intelligent temperature control chip, three-stage temperature adjustment, intelligent temperature control is more secure
8. Fast heating in 10 seconds, large heating area
9. The heating piece is fixed by hook and loop fastener, convenient and quick
10. Net weight: 72G
11. How to use the switch: press and hold for 3 seconds to turn on the device, the red breathing light will turn on and it will turn blue automatically after reaching a certain temperature. Lowest, press three times for the red third gear high temperature, press and hold for 3 seconds to turn off, and automatically turn off after 2 hours of standby, no longer need to worry about the virtual power consumption

Instructions:
1. Power on: the red light, blue light, and green light each flash once and then go out.
2. Standby: red light breathing blinking state, the temperature will automatically turn into blue light mid-range automatically after 2 hours of automatic shutdown
3. Working status: the indicator light is always on (high-grade: red light is always on, mid-range: blue light is always on, low-grade, green light is always on)
4. Press and hold the key for 3 seconds: enter standby mode or shut down
5. Click on the key: switch gear

Wiring method:
1. Connected to the electric door lock (behind the key) of the motorcycle, the red wire is connected to the positive output wire of the electric door lock, and the black wire is connected to any negative pole or ground on the car. [This method is suitable for those who do not want to use the standby state but are easy to forget. Cheers who turn off the switch]
2. Connected to the positive and negative positions of the battery, red is connected to the positive electrode of the battery [+], and black is connected to the negative electrode of the battery [-]. Because this electric heater handle has added the function of automatic shutdown on standby, even if the battery has forgotten to turn off the switch, just turn on In standby mode, you do not have to worry about running out of batteries (it is recommended to turn on the standby mode in advance)

pay attention:
1. Please select the appropriate gear according to the ambient temperature. When the hand temperature is too low to accurately sense the temperature of the electric hand grip under low temperature conditions, please use the low or middle gear first to prevent high temperature burn
3. This product can only be installed on the handlebar of a motorcycle to be powered on. Before installation, you can use a battery to test whether the product is properly powered on.
4. It is strictly forbidden to work with electricity (air burn) when not riding, in order to prevent the temperature of the electric heating handlebar cover from being too high and damaging the original handlebar.
5. It is recommended to connect the electric door lock wire. Most models have black positive pole and green negative pole. It is recommended to use a multimeter to measure the specific situation.

Specification:
Package Weight
One Package Weight 0.11kgs / 0.24lb
Qty per Carton 60
Carton Weight 7.68kgs / 16.93lb
Carton Size 36cm * 35cm * 32cm / 14.17inch * 13.78inch * 12.6inch

More Pictures

MOTA6051
MOTA6051
MOTA6051
MOTA6051
MOTA6051
MOTA6051
MOTA6051
MOTA6051

Leave a Comment