2. Machine line length: 130cm; Extension line line length: 22cm
3. Input voltage: DC12V
4. Output voltage: 5V
5. Output current: 2.4A
6. Installation hole diameter: install and use within 22mm-26mm in diameter
7. Accessories: charger x1; faucet accessories x1; screws x2; 22CM extension cable x1
8. Installation scope: suitable for 12V travel tools such as motorcycles, ATVs, etc.
9. Product use: It can charge mobile phones, tablets, navigation, GPS, etc. At the same time, it can detect the battery voltage at any time to ensure the safety of the battery
10. Wiring instructions: the red wire is connected to the positive pole of the power supply, the black wire is connected to the negative pole of the power supply
1. The input voltage of the product is DC12V, which is suitable for all 12V motorcycles / ATVs and other travel tools or machines. The use range is very wide.
2. The output current of the product is 2.4A, which can be used for charging mobile phones, tablets, navigation, GPS, etc., intelligent power supply, safe and convenient
3. The product has a voltmeter, which can detect the use of the battery at any time to prevent safety accidents caused by bad batteries.
4. The product has independent switches, which can control USB and voltmeter at the same time.
5. The inside of the product is made of Hangzhou flame retardant and environmentally friendly nylon material, and the outer shell is heat-resistant and corrosion-resistant.